checkfirewall
Check that ports 80, 443, 21, and 22 are open in the server firewall, and if any is closed, reinstall the firewall and alert the administrator by email and WhatsApp
- Command:
/go/checkfirewall - Category: Security
- Required option: None
- Output: One line for each closed port, or nothing
- Last updated: 2026-11-20
On this page: Overview · Quick start · Syntax · Options · Output · Examples · Troubleshooting · Details · See also
Overview
/go/checkfirewall makes sure the firewall has not been left blocking the ports that a GoAdmio server needs. It:
- reads the firewall rules (firewalld or UFW, depending on the operating system)
- checks that the four required ports are allowed
- if any port is missing, runs
firewallto install the firewall rules again - sends the administrator a message by email and by WhatsApp that lists the missing ports
Ports checked
| Port | Used for |
|---|---|
80/tcp |
HTTP |
443/tcp |
HTTPS |
21/tcp |
FTP |
22/tcp |
SSH |
Other ports, such as mail ports or the panel ports, are not checked.
Supported systems
| Operating system | Firewall |
|---|---|
| AlmaLinux, Rocky, CentOS, Red Hat, Fedora | firewalld |
| Debian, Ubuntu | UFW |
On any other system, the command does nothing.
Quick start
/go/checkfirewall
Syntax
/go/checkfirewall
The command takes no options or arguments. Run it as root.
Options
None. Any arguments you pass are ignored.
Output
The command prints nothing when all four ports are allowed. Otherwise it prints one line for each missing port:
Port 443 is not allowed in UFW.
On firewalld systems the line ends with in FIREWALLD. instead.
| Message | Meaning |
|---|---|
Port <n> is not allowed in UFW. or ... in FIREWALLD. |
The port is not in the firewall rules. The firewall is reinstalled and the administrator is alerted. |
UFW is not active. |
UFW is turned off. The command stops, and nothing is repaired or sent. |
FIREWALLD is not active. |
firewalld is not running. The command stops, and nothing is repaired or sent. |
Each run also adds a line to /var/log/go/checkfirewall.log.
Alert
When a port is missing, the administrator receives a message titled Firewall Checker that lists each missing port, for example:
- Port 443 is not allowed in UFW.
It is sent by email and by WhatsApp. The message lists the problems found before the firewall was reinstalled. The command does not check the ports again afterwards.
Examples
# Check the firewall
/go/checkfirewall
# See the rules the command looks at (Ubuntu/Debian)
ufw status
# See the rules the command looks at (AlmaLinux/Rocky/CentOS)
firewall-cmd --list-ports
# Open a port by hand with an explicit protocol
ufw allow 443/tcp
Troubleshooting
| Symptom | Likely cause | Fix |
|---|---|---|
| Nothing is printed | All four ports were found in the rules, or the operating system is not supported. | Nothing to do. |
UFW is not active. or FIREWALLD is not active. |
The firewall is turned off. With no firewall, ports are not blocked by it. | Install and start the firewall with firewall. |
| A port is reported as closed, but it works | The rule does not look like <port>/tcp. For UFW, ufw allow 80 is listed as 80, not 80/tcp. For firewalld, a port opened as a service (such as http) is not in the port list, and ranges and other zones are not checked. |
Add an explicit rule such as ufw allow 80/tcp, or use allow. |
| A port is reported as open, but it is not | The check matches part of the text, so 8080/tcp counts as 80/tcp, and 8443/tcp counts as 443/tcp. |
Check the rules by hand. |
| The same alert arrives on every run | The rule is still missing after the firewall is reinstalled. | Open the port by hand, and check the rules again. |
| No email or WhatsApp message arrives | The administrator's email, mobile number, or WhatsApp settings are missing in GoAdmio. | Check them with config and email. |
An error from ufw or firewall-cmd |
The command was run without root. | Run it as root. |
Details
What it does, in order
- Logs the run to
/var/log/go/checkfirewall.log. - Reads the operating system name.
- If the firewall for that system is not active, prints a message and stops.
- Looks for
80/tcp,443/tcp,21/tcp, and22/tcpin the firewall rules. For UFW, the rule must also showALLOW. - If any port is missing, runs
firewall, then sends the alert by email and WhatsApp.
Known issues
- The check is a text search, so part of a longer port number can match (see Troubleshooting).
- An inactive firewall is reported, but it is not started and no alert is sent.
- Only the default firewalld zone is checked.
- The server IP, host name, version, and the WhatsApp settings are read at the start but not used by the command itself.
- The exit status is
1only when the firewall is not active. Otherwise it is0, even when ports were missing.
See also
| Command | Description |
|---|---|
firewall |
Install a firewall on a GoAdmio server |
allow |
Open a port in your server's firewall |
deny |
Block incoming traffic on a TCP port |
checkimap |
Check the IMAP port and SSL certificate |
checksmtp |
Check the SMTP port and SSL certificate |
email |
Change the server's main GoAdmio contact email |